Home › Services › Mechanical Repairs › Engine Rebuilds & Head Gaskets
Engine repairs · Rebuilds · Head gaskets · Cars, vans & 4x4s · Fenton workshop
When an engine is smoking, overheating, losing coolant or has suffered a snapped belt, it isn’t always the end of it. We repair and rebuild engines and replace head gaskets on cars, vans and 4x4s, petrol and diesel, at our Fenton workshop. We find out what’s actually wrong first, then tell you honestly whether it’s worth fixing.
Head gasket replacement
Engine repairs and full rebuilds
Cars, vans and 4x4s, petrol and diesel
Fenton workshop, Monday to Saturday
Get an engine repair quote
Send us your reg and tell us what the engine is doing. We’ll tell you what we need to check and give you a price before any work starts.
Since 2021
Trading in Stoke-on-Trent
2,500+
DPF cleans completed
Mon–Sat
9am–6pm
Fenton
201 King Street workshop
How it works
Engine work is expensive, so we never guess. We test first, then strip only as far as we need to give you a real answer.
We run diagnostics and test the cooling system. Where it points to the head gasket, we test the coolant for combustion gases to confirm it.
We take the engine apart as far as needed and check the head, block and internal parts, so we know exactly what’s damaged.
We tell you what it needs, whether a repair or rebuild makes sense, and give you a price. Nothing is done without your OK.
We rebuild with new gaskets, seals and parts, set it up, check for leaks and road test it before you collect it.
Warning signs
These faults can point to a head gasket, a damaged head or worn internals. Some have other causes too, so get it tested before you spend anything.
White, sweet-smelling smoke, a rising temperature gauge or a coolant level that keeps dropping. These are classic signs of a head gasket problem.
A creamy, mayonnaise-like residue under the oil cap or on the dipstick. Coolant may be getting into the oil.
Bubbles in the expansion tank once the engine is warm. Combustion gases may be getting into the cooling system.
Rough running, a misfire or a big drop in power. A gasket leaking between cylinders can cause this.
A deep knock that gets worse with revs. This can mean worn bearings. Stop driving it and get it checked.
The engine stopped suddenly and won’t run properly since. A snapped cambelt or timing chain can bend valves and damage the head.
Head gaskets
The head gasket seals the gap between the cylinder head and the engine block. When it fails, coolant, oil and combustion gases can mix or escape. Overheating is often part of the story, and a hot engine can also warp the cylinder head.
A proper head gasket job means taking the head off, sending it to be checked and skimmed flat, and refitting it with a new gasket set. Fitting a new gasket on a warped head just leads to the same fault again. Keep driving on a failing gasket and it can overheat further, warp the head or wreck the engine, so stop and get it tested.
Call us with the reg and what it’s doing. We’ll get it tested before the damage gets worse.
Rebuilds
In a rebuild we strip the engine, measure the worn parts against the maker’s limits and replace what’s out. That can mean new bearings, pistons, seals and gaskets, a skimmed head and machined bores or crankshaft.
A common reason for a rebuild is a snapped belt or chain, so changing your cambelt or wet belt on time is cheap insurance. Diesel engines also suffer when a blocked DPF raises back pressure, so it’s worth sorting that before it reaches the engine.
Tell us the reg and the fault. We’ll talk you through both options so you can decide.
Vehicles
We work on engines in everyday cars, working vans and 4x4s, petrol and diesel. Every engine is different, so we always inspect yours before we price it.
Family cars, small runarounds and diesels doing the school run. We’ll explain what’s wrong in plain English.
We know a van off the road means lost work. Transits, Sprinters, Vivaros, Relays and the rest. Tell us when you need it back and we’ll be upfront about whether we can hit that. Running several vans? See our fleet DPF cleaning too.
Heavier vehicles put more wear on brakes, clutches and engines. We regularly work on 4x4s and pickups.
Garage services
Engine faults often start with a warning light, so we usually begin with diagnostics. We also do cambelts, wet belts, clutches, brakes and DPF work, so we can sort what it needs in one visit.
FAQs
Straight answers to what people ask us most about engine rebuilds and head gaskets.
What are the signs of a blown head gasket?
On petrol and diesel engines, the usual signs are white, sweet-smelling exhaust smoke, losing coolant with no visible leak, overheating, a milky residue under the oil cap, bubbles in the coolant tank and misfiring or loss of power. Some of these have other causes, so we test to confirm before quoting.
How do you test for a head gasket problem?
We pressure test the cooling system and test the coolant for combustion gases. Together with the symptoms, that tells us whether the gasket has failed or whether the problem is somewhere else.
Can I keep driving with a blown head gasket?
It’s not a good idea. It can make the engine overheat further, warp the cylinder head or lead to the engine failing completely. Stop driving it and get it tested.
Can you rebuild a diesel engine?
Yes. We rebuild diesel and petrol engines in cars, vans and 4x4s. The work is similar: strip, measure, machine where needed, then rebuild with new parts.
Are engine rebuilds worth it?
It depends on the car’s value, its overall condition and how much damage there is. Sometimes a rebuild is the best fix. Sometimes it isn’t worth it. We’ll tell you honestly once we’ve inspected it.
Should I rebuild my engine or get a replacement?
A used replacement engine comes out of another vehicle, often with little known history. A rebuild means your own engine is stripped, measured and rebuilt with new parts. We’ll talk through both options and the price of each for your car.
How long does a rebuilt engine last?
It depends on how much was replaced and how it’s looked after afterwards. Regular oil and filter changes and not overheating it make a big difference. We’ll tell you what we’ve renewed so you know where it stands.
How long does a head gasket job take?
Usually a few days, because the head has to go away to be checked and skimmed. It depends on the engine and how easy the head is to get to. We’ll tell you when we price it.
How much does an engine rebuild or head gasket repair cost?
It depends on the engine and what we find once it’s apart. Send us your reg and we’ll give you a price before we start. Nothing gets done without your OK.
Send us the reg and tell us what it’s doing. We’ll test it, tell you what’s wrong and give you a straight price before any work starts.
201 King Street, Fenton, Stoke-on-Trent ST4 3ER · Open Mon–Sat 9am–6pm, closed Sunday · Visits by appointment